The 606T is the Toms section clone of the classic TR-606 Drum Synth.
It’s the 2nd Eurorack module derived from the TR-606.
Continue reading 606T 0.1 – TR-606 Toms clone
Category Archives: Electronic projects
Bus Comparison Guide
Feeling a bit lost with all the different Eurorack Buses? Here is a list and a summary of the various versions available.
Eurorack Power Bus – 28 Connectors
This is the biggest Eurorack Power Bus: 28 connectors on a 25cm x 6cm board!
Continue reading Eurorack Power Bus – 28 Connectors
UC Clock Divider
The UC (µC) Clock Divider is a clock/beat/step counter/divider, based on Arduino, with 8 outputs, configurable in code.
With a clock divider you can slow down a tempo, create rhythmic patterns or, with a audio signal at the input, get sub-octaves.
Continue reading UC Clock Divider
MIDI8d – 8 Digital Outputs
MIDI8d is a simple yet powerful 8 Digital Outputs from a MIDI/TRS input connection.
Continue reading MIDI8d – 8 Digital Outputs
Simple LFO 1.5
The Simple LFO is a… simple LFO module for your Eurorack system.
Two waveforms available: Triangle and Square wave. Adjustable amplitude and Low/High range switch.
It’s easy to build, easy to understand and maintain. Only easy-to-find through-hole components.
3to1 – Dual Precision adder
3to1 is a utility module, with three inputs and one output. The output voltage being the exact addition (or subtraction) of the three input voltages.
The Eurorack Stripboard protoboard is now available in the awesome DIY Layout Creator software since version 4.17!
Continue reading Eurorack Stripboard in DIY Layout Creator!
USB Power Output
The USB Power Output module is a simple 3HP wide utility module with 4 USB A connectors. Perfect for powering a lamp, a small Keyboard (I use it for my Arturia Keystep) or anything else.
Continue reading USB Power Output
Simple VCO – Update 0.2
The Simple VCO belongs to the same series as the Simple LFO.
It’s a very stripped down version of the Formant VCO, modified and adapted to the Eurorack format.
This is the updated documentation for version 0.2.
The Simple VCO is 1V/Oct capable. In order to reduce the number of parts, only one waveform output is available.
It is a super simple module, easy to build, to understand and maintain, yet fun to play and musically accurate.
Continue reading Simple VCO – Update 0.2