A quick post about an old design.
This is a simple 3 mono input mixer.

Continue reading Simple Mixer with 3 Mono Inputs
A quick post about an old design.
This is a simple 3 mono input mixer.

Continue reading Simple Mixer with 3 Mono Inputs

The Passive Multiple is the simplest module you can find in a Modular Synth. But you really need a bunch of them.
Continue reading Passive Multiple
I’m working on improving my projects’ “documentation and build instructions”.
This is the next update:

This is an updated documentation and build instructions for the Attenuator-Inverter module:
Unfortunately, the PSU you just bought isn’t adequate for your Eurorack system?
It’s common to be confused by the “-V” label.

Yes, “-V” on a PSU is a “negative” output, but only compared to the positive output. Your synth needs more!
So, what is the difference between “-V” and “ground”? How to select and use a proper power supply for your Synth?
Continue reading Ground is Not your Negative Rail

It is time for an update of the Compact Eurorack Power Bus! This is version 1.1!

The SMPS (Switched Mode Power Supply) is a Eurorack, panel mounted, PSU project.
Continue reading Switched Mode Power Supply, first tests

If you want to power up your Mini Dual Power Supply, you need to supply it with an AC voltage on its input.
You can either use a simple transformer or, safer and easier to manage, use a AC/AC wallwart adapter.
It’s not easy sometimes to make distinction between an AC to DC adapter and an AC to AC adapter. They share the same form factor, the same look and feel. But there are clear indications to help you determine the type of each one.
Here’s a quick comparison between the two types with two example closeup pictures, one AC/DC adpater and one AC/AC adapter:
Continue reading Choosing a suitable adapter for the MDPS

Usually, the pin #1 of a ribbon is colored in red or blue. Never trust the ribbon cable color! And never trust a cable.
Always check twice the correct polarity and voltage before pluging your module!
