The 3 x Passive Attenuator is an older project that offers, as its name implies, three independent passive attenuators. This very simple module is extremely useful when you need to reduce the amplitude of a signal that would be too strong for another module, or when sending a Eurorack-level voltage to a more sensitive, non-Eurorack audio equipment.
Continue reading 3 x Passive Attenuator
The Simple VCA is a single-chip Voltage Controlled Amplifier module in Eurorack format.
The Simple VCO belongs to the same series as the Simple LFO.
It’s a very stripped down version of the Formant VCO, modified and adapted to the Eurorack format.
The Simple VCO is 1V/Oct capable. In order to reduce the number of parts, only one waveform output is available.
It is a super simple module, easy to build, to understand and maintain, yet fun to play and musically accurate.
Continue reading Simple VCO – Update 1.0
The Simple LFO is a… simple LFO module for your Eurorack system.
Two waveforms available: Triangle and Square wave. Adjustable amplitude and Low/High range switch.
It’s easy to build, easy to understand and maintain. Only easy-to-find through-hole components.
Following the Simple LFO module, here comes the Simple VCO.
It’s a very stripped down version of the Formant VCO, modified and adapted to the Eurorack format.
This circuit is also present in the VCO section of the DM77 Drum Module.
The Simple VCO is 1V/Oct capable. In order to reduce the number of parts, only one waveform output is available.
The result is a super simple module, easy to build, to understand and maintain.
Continue reading Simple VCO – First prototype
I released a new update of the Simple LFO, now in version 1.3.
The update is mostly about how the LED blinks.
This is an update of the Simple LFO module.
The major improvement is the implantation of an amplitude potentiometer on the PCB.
Continue reading Simple LFO 1.2Thank you Kristian for this excellent video and your friendly support!
A quick post about an old design.
This is a simple 3 mono input mixer.
Continue reading Simple Mixer with 3 Mono Inputs
I’m working on improving my projects’ “documentation and build instructions”.
This is the next update:
