8 x Eurorack Power Connectors in a very compact (100 x 50 mm) board.
It’s a passive board for Eurorack Enthousiasts.
Place the Bus Board in the back of your Eurorack Skiff or your last monster case expansion and plug in it your modules.
It can hosts 8 x Keyed Eurorack 16-pin (2 x 8) connectors with 3 LEDs for Voltage Rails visualisation. Input is done by two Screw Terminal connectors or by Eurorack 16-pin connector (as in a chained bus topology).
I needed one for my new modules. So I designed one. Any Eurorack user needs a way to bring power to his beloved modules.
It’s compact, affordable, and easy to use! Screw Terminals are very versatiles. You can connect easily any Power Supply to the Bus Board. LEDs shows you if there’s energy on the rails, and with the correct polarity. HE-10 Connectors are keyed: no more deadly reverse polarity pluging error! Even in the dark or deep into your case, don’t fear to kill your module by reversing the connector. Don’t fear to miss a pair of pins, which generally ends in a nasty firework too.
Less magic smoke, more music!
I have some surplus available for purchase on my Tindie Store and on my eBay Profile!
- PCB Only
- Full Kit: PCB + Components
- Full Kit: PCB + Components + Pre-Soldered SMD Resistors
- Fully Assembled module